Description
Hall Research
VGA over UTP Receiver ONLY
Video over UTP Receiver
The UV1-R receives a Cat5 signal from one of the following devices: (UV1-SL, UV2-S, UV4-S and UV8-S) and converts the signal back into VGA.
The UV1-R is supplied phantom power via the Cat5 from the sending unit or from a local power supply.
The UV1-R can be located up to 500 feet (150 meters) from the sending unit with little to no degradation of video quality. Made in the USA.
- Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
- Amplifies the signal for clean and crisp transmission
- Differential signaling eliminates ground loops and noise
- Handles resolutions up to 1920x1440 at 60Hz
- Rugged, Reliable, Compact size
- Only one end requires power in most applications. Power supply can be connected at the sending or the receiving end, whichever convenient.
- Drive standard CAT5 cables to 500 feet for (VGA and Component Video) or to 2000 feet for (Composite Video + Audio)
Dimensions:
- 0.8" H x 1.7" W x 4.5" D
Weight:
- 2 lbs. (shipping)
Power Supply:
- From utility-power (mains) outlet, through included external power adapter. Output Voltage: 6v to 9v DC Center-Positive. Current requirement 500 ma max
Max Distance:
- Up to 500 ft. (150 m) for VGA and Component Video models, or 2000 ft (609 m) for Composite Video and Audio models
Resolution:
- Up to 1920 x 1440 non-interlaced at 60Hz
Standards:
- VGA, SVGA, XGA, or UXGA video
Video Types:
- VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr
